Saddle (Odd Lot-455sf)

Initial Care:

Following installation, clean with Bruce Dura-Luster No-Wax similar in nature) on your floor: ammonia-based cleaners, acrylic finishes,wax-based products, detergents, bleach, polishes, oil soap, abrasive cleaning soaps, or acidic materials such as vinegar. Many of these products can pit or etch the finish of your flooring or prevent the proper use of recommended maintenance materials.
8. Keep animal nails trimmed to minimize finish scratches.
9. Do not damage your floor with shoes having heel taps or sharp objects protruding from the sole such as rocks, exposed nails and gravel.
10. Avoid walking on wood floors with spike- or stiletto-heeled shoes. Spike or stiletto high-heels must be properly maintained to prevent damage from the steel heel support.
11. Do not roll or slide heavy objects directly upon the floor. When moving appliances or heavy furniture, consider laying a solid protective covering on your floor and gently "walk" the item across it. Carpet or cardboard is not adequate to prevent surface compression scratches.
12. Use furniture leg protector pads under all furniture and make certain to keep them clean and well maintained.
13. Replace hard, narrow furniture rollers with wide rubber rollers.
14. Keep the relative humidity in your home between 35% and 55%.
15. Protect your floor from direct sunlight. Use curtains and UV resistant film on large glass doors and windows. Move area rugs occasionally as they block sunlight and may give the appearance of discoloring under the rug.

Quick Fix Tips
Spots caused by food,water or animals

• Apply Bruce Dura-Luster No-Wax Floor Cleaner to a clean soft cloth.
  
• Rub the area to remove the stain or spot.
  
• More stubborn spots may require additional cleaning with Bruce Clean ‘n’ Strip®, followed by cleaning with Bruce Dura-Luster No-Wax Floor Cleaner.

• Apply Bruce Dura-Luster No-Wax Cleaner to a clean soft cloth.
  
• Rub the area to remove the stain or spot.
  
• If stain remains, rub with a cloth dampened with Bruce Clean ‘n’ Strip and follow by cleaning the area with Bruce Dura-Luster No-Wax Floor Cleaner.

• Apply a sealed plastic bag filled with ice on top of the deposit.
  
• Wait until deposit becomes brittle enough to crumble off.
  
• After deposit has been removed, clean entire area with Bruce Dura-Luster No-Wax Floor Cleaner.

• Use Bruce Touch-Up Kit in smaller areas.
  
• Apply Bruce Fresh Finish™ or Fresh Finish Low Gloss when larger areas are reconditioned.

• Individual planks, strips or parquets that are heavily gouged or damaged can be replaced.
  
• If needed, the entire floor can be refurbished by applying one or more coats of Bruce Fresh Finish or Fresh Finish Low Gloss.